MC4连接器,光伏接线盒,光伏线束,太阳能接线盒,光伏连接器,太阳能连接器丽辉光伏（LHPV）

2.主要特性：(Main characteristic)

● 接线盒采用全灌胶进行密封，防水等级高，内部二极管散热效果好。

The junction box uses the glue to seal, the waterproof effect is better, the fitting

interior heat is better.

● 此款接线盒为三分体设计，电缆采用水平出线方式，客户布线时可以减少电缆弯曲应力，也可以节

省电缆使用量，降低组件功率的损耗，同时将“热斑效应”的影响一分为三，降低了高温对光伏组件的影响。

This junction box is a three-part design, and the cable adopts horizontal outlet mode, which

can reduce the cable bending stress, save the cable usage, reduce the power loss of PV module,and

divide the influence of "hot spot effect" into three parts. The influence of high temperature on

photovoltaic modules is reduced.

● 三分体结构设计可以有效的降低二极管表面的温度，确保光伏组件高功率、高电流输出，降低温度对功率的影响，

为大功率光光伏组件提供很好的解决方案。

Three-part design can effectively reduce the temperature on the surface of the diode, ensure the

high power and high current output of the PV module, reduce the influence of temperature on the

power, and provide a good solution for the high power photovoltaic module.

型号Type：LH-858C-1
绝缘材料Insulation material： PPO
连接器方式 Connection method：焊接soldering
额定电压Rated voltage：1500V DC
核定电流Rated current：≤22A
安全等级Safe class：Class Ⅱ
温度范围Temperature range：﹣40℃ ～ +85℃
电缆截面积Section area of cable：1*4mm²
线缆直径Diameter of cable：6.1±0.1mm
保护等级Degree of protection：IP68
防水结构Waterproofing structure：灌封胶Potting sealant （AB glue）
接触材料Contact material：紫铜镀锡Red Copper Tin Plated
阻燃等级Flame class：UL94-V0
认证Certification：南德TUV（TUV SUD）
端子链接方式（Termination and connection） 1、电缆和内部端子采用机械铆接方式（The cable and internal terminals using mechanical riveting method） 2、二极管和金属端子连接采用模块一体封装方式（Diodes and metal terminals are connected by integrated module packaging） 3、焊带与内部金属端子采用焊接方式（The copper ribbon bands and metal terminal are connected by soldering method）
二极管数量及连接器方式Diode number and connection mode
二极管型号 Diode model	核定电流 Rated current	核定电压 Rated voltage	数量 Number	连接方式 Connection mode
30SQ045	18A	45V	3
GF4045	22A	45V	3
装备不同规格的二极管会改变接线盒的最大工作电流。 The rated current will be changed when the box is fixed with different types of diode.